Products

Jaw Kit – CA0007 for JJ0250

By KMA Admin / November 3, 2017 /

The patented jaws on your JackJaw® JJ0250 wood post puller will wear over time. They are easily replaced in the field with a few tools. Wear time is determined by your local conditions and number of stakes pulled.

Operating Instructions (pdf)

Read More

Jaw Kit – CA0010 for JJ010X & JJ020X

By KMA Admin / November 3, 2017 /

The patented jaws on your JackJaw® stake puller will wear over time. The amount of time or number of pulls that you will get from the jaw set is determined by your conditions.

Replacement jaw kit for single bladed link arms. JackJaw® models JJ010X and JJ020X models. Kits come with two 3/8″ jaws and replacement hardware.

Operating Instructions (pdf)

Read More

Jaw Kit – CA0011 For JJ0350/JJ0550

By KMA Admin / November 3, 2017 /

The patented jaws on your JackJaw® wood post puller will wear over time. They are easily replaced in the field with a few tools. Wear time is determined by your local conditions and number of stakes pulled.

Replacement jaw kit for 3/8″ thick wood post jaws using clevis link arms. Kits come with two jaws and replacement hardware. This kit is for JackJaw® models JJ0350 and JJ0550.

Operating Instructions (pdf)

Read More

Jaw Kit – CA0015 for JJ0226

By PWS Builder / November 2, 2017 /

The patented jaws on your JackJaw® stake puller will wear over time. The amount of time or number of pulls that you will get from the jaw set is determined by your conditions. Replacement jaw kit for drive rod puller,  JackJaw® models JJ0226.  Kits come with two welded 3/8″ fine tooth jaws and replacement hardware.

Operating Instructions (pdf)

Read More

JJ040X Bag – PA0008

By KMA Admin / November 2, 2017 /

JJ040X Bag

Canvas bag for the JackJaw 40X Series extractors.

Read More

Link Arm Kit – LI0300PR

By KMA Admin / November 3, 2017 /

Replacement link arm kit for JackJaw® models: JJ0301, 302, 303, 304, 305, 307, 310, 311, 314, 315, 350, 501, 502, 504, 505, 507, 510, 511, 514, 515, 550

The kit comes with two link arms and the bolts that attach them to the slide block. The kit is used as replacement parts for worn or damaged link arms.

Link arms are a normal wear part.

Made in the U.S.A.

Link Arm Replacement Instructions

Read More

Link Arm Kit – LI0304PR

By KMA Admin / November 3, 2017 /

Service link arm kit for JackJaw® models JJ0300, JJ0306, JJ0308, JJ0309, JJ0500, JJ0306, JJ0508 and JJ0509.

The kit comes with two link arms and the bolts that attach them to the slide block. The kit is used as replacement parts for worn or damaged link arms.  Made in the U.S.A.

More information below.

Read More

Tent Stake Adapter – AC0007 Small Stakes

By KMA Admin / November 3, 2017 /

The AC0007 Tent Stake Adapter is used with the JackJaw® models that have adjustable bases to remove flush pounded stakes or those used in stake bar systems.

This adapter accommodates small diameter tent stakes (up to 1 1/4″ head). Models with adjustable bases: JJ0307, JJ0507

Read More

Tent Stake Adapter – AC0009

By KMA Admin / November 3, 2017 /

The AC0009 Tent Stake Adapter is used with the JackJaw® models that have adjustable bases to remove flush pounded stakes or those used in stake bar systems.

This adapter accommodates standard tent stakes (up to 2 1/2″ head). Models with adjustable bases: JJ0302, JJ0502

Read More

Tent Stake Adapter Warner Shelter AC0008

By KMA Admin / November 2, 2017 /

The AC0008 Tent Stake Adapter for Warner Shelter tents is used with the JackJaw® models that have adjustable bases to remove flush pounded stakes or those used in stake bar systems.

This adapter accommodates tent stakes used with Warner Shelter tents.  Models with adjustable bases:  JJ0302, JJ0502

Read More